Tray stand V


Here's version V that was smaller than the previous versions and could fit inside the tray. [caption id="attachment_266" align="aligncenter" width="625"]Tray stand version V Tray stand version V[/caption] Well, because it could fit inside the tray then it could also lay horizontally at the second height. Bingo! We have arrived at reasonable prototype!  Aesthetic with form &function.  Now we were getting somewhere as it could be place horizontally as well. [caption id="attachment_267" align="aligncenter" width="625"]tray stand version V tray stand version V[/caption] Here's the final version upright. Each surface is glued and connected using hidden dowel-pins and biscuit joints. [caption id="attachment_273" align="aligncenter" width="625"]Tray stand version 5 Tray stand version 5[/caption] So there you have it, a finished prototype ready for production! All we need to do is figure out the finish and work out a price. Should the stand be stained the same as the tray and what about the edges and finish? Take a look at the tray color variations. Decisions, decisions. [caption id="attachment_268" align="aligncenter" width="625"]Tray stand top view version V Tray stand top view version V[/caption] [caption id="attachment_269" align="aligncenter" width="625"]Tray stand VI master Tray stand VI master[/caption] Here's the design and implementation side by side.  Finally, here's a small video on how to put the tray stand together - enjoy!
   

Leave a comment


Please note, comments must be approved before they are published